Repositorio Digital Tecnológico Universitario Vida Nueva: Envíos recientes

Mostrando ítems 1-20 de 334

Página siguiente

Diseño y construcción de una interfaz para el control de un robot por medio del reconocimiento de personas y objetos.

Ortega Quizhpe, Wilson Dario; Ortega Quizhpe, Jhon Carlos (2024-03)

It is important to know the importance of this project, since, nowadays, both AI and automation processes are gaining more strength and each time, these new technologies facilitate the daily life of each person, the main ...
Diseño y construcción de un módulo didáctico para el funcionamiento de un motor de un vehículo eléctrico con panel.

Vilatuña Taco, Bryan Dario (2024-01)

The research topic involves the design and construction of a didactic module for the operation of an electric vehicle s motor with a solar panel. The technological proposal includes systems available on the national and ...
Desarrollo de un prototipo de comunicación inalámbrica basado en WiFi para transferencia de datos mediante microcontroladores.

Apugllon Vimo, Mauro Sebastian; Tito Ailla, Kevin Christian (2024-03)

In today s world, the Internet of Things IoT and automation are highly significant fields, both in everyday life and at the industrial level, where electronic devices of these new generations have wireless communication ...
Propuesta del modelo de gestión para el mejoramiento contable y administrativo bajo NIIF PYMES en la panificadora La Quiteñita.

Suntaxi Quinga, Alisson Estefania; Toapanta Velasque, Maria Rosaura (2024-08)

The transition to International Financial Reporting Standards IFRS for Small and Medium Enterprises SMEs presents significant challenges for companies such as La Quiteñita bakery in Ecuador. The overall objective of this ...
Automatización de una máquina dosificadora de dos pistones mediante.

Saquinga Tituaña, Alex Dario; Toapanta Chingo, Gabriel Omar (2024-03)

This work is focused on the automation of a two piston dosing machine by means of a PLC S71200, requiring a contextualization and foundation of the project, where it begins with an analysis and essential research of the ...
Construcción de un sistema automático para una alarma de evacuación en una institución de educación superior.

Sandoval Tapia, Vinicio Andres (2023-07)

The main objective of this project was the development of an emergency plan applied to a higher education institution, aiming to ensure the safety of students, faculty, and staff in the event of emergencies such as fires, ...
Diseño y construcción de un banco de pruebas de computadoras automotrices para Chevrolet Corsa, Hyundai Accent y Nissan.

Moreno Chiluisa, Edgar Vinicio; Pilaguano Pilicita, Lenin Marcelo; Pitisaca Valle, Jose Gabriel (2024-06)

This study focused on designing and constructing a multi brand automotive computer test bench for the Chevrolet Corsa, Hyundai Accent, and Nissan Sentra B13 models. The main objective was to develop a system that would ...
Diseño y construcción de un banco de prueba para ejecutar procesos de verificación y diagnóstico en diferentes computadoras.

Mayorga Jarrin, Roberto Carlos; Simba Bravo, Edwin Efrain (2024-03)

The present work deals with the construction of equipment for banking ECUs of different automotive computers, With the advance of technology in the automotive sector, The motor module has acquired a fundamental role for ...
Desarrollo del módulo de gestión académica del rol de secretaria en la Institución Educativa Fiscal Sucre.

Loor Poveda, Diego Rolando (2024-12)

In principle, technology has shown how useful it can be concerning the automation of jobs and helping with tasks that were previously more complicated, always leaving question marks; Will it help improve other areas? How ...
Diseño y construcción de un sistema de control para motores de corriente continua por medio de una tarjeta electrónica.

Pachacama Cando, Angel Israel; Llumiquinga Guallichico, Edwin Alexander (2024-03)

In today s society mobility oriented development in electronic projects is often limited by the scarcity of options hat fit the specific needs of projector, this restricts the designers of new projects in the control system ...
Diseño e implementación de un módulo de entrenamiento del sistema de alimentación de combustible en un sistema de inyección a gasolina del vehículo Chevrolet Aveo 1.5.

Guadalupe Agualsaca, Byron Lenin; Lopez Tapia, Jose Fernando (2024-08)

This research focuses on the design and implementation of a training module for the fuel supply system in a gasoline injection system of the Chevrolet Aveo 1.5 vehicle. eThe main focus of this research was the development ...
Diseño y construcción de un sistema de control paso a paso para la toma de registros fotográficos de documentos.

Timbiano Moncerrate, Omar Said; Garcia Caiza, Fausto Ronaldo (2024-03)

In a world where the difficulty of taking photographs has become a problem that requires immediate attention, aspects such as speed of capture, precision in movements and synchronization are of vital importance worldwide ...
Diseño y construcción de un módulo de refrigeración para el control y monitoreo de temperatura mediante redes Lan.

Tupiza Flores, Estalin Daniel; Diaz Quilachamin, Tony Javier (2024-03)

This research focused on both the design and development of a module for a refrigeration system using LAN cards, responding to the lack of specialized modules in this area to facilitate the learning of students in the ...
Plan de promoción turística en la parroquia Orianga del cantón Paltas de la provincia de Loja, para la reactivación turística.

Diaz Agila, Juliana Stefania (2023-03)

The objective of this research is to design a tourism promotion plan for the parish of Orianga in the canton of Paltas, using tools that will improve its visibility in the tourist market in the province of Loja. It will ...
Propuesta de una planificación financiera para la empresa “Distribuidora Automotriz Bolaños” ubicada en la ciudad de Quito.

Collaguazo Rojas, Brandon Daniel; Escorza Manoto, Jordy Alexander (2024-08)

The purpose of this non experimental transversal work is to propose an idea of financial programming for the company Distribuidora Automotriz Bolaños, leaving each step in a theoretical and practical way, focusing on the ...
Diseño y construcción de un sistema mecánico para la movilización de un robot terrestre con una estructura basada en PLA.

Suntaxi Suntaxi, Michael Javier; Chicaiza Guanopatin, Luis Mateo (2024-03)

The current problematic situation lies in the lack of an efficient solution that integrates 3D printing technology with PLA in the structure of the terrestrial robot, the research focused on the design and development of ...
Construcción de un horno eléctrico controlado por un HMI para el secado de motores rebobinados.

Cardenas Nacimba, Cristopher Paul; Quilumba Luje, Darlin Josue (2024-03)

The construction of the rewound motor drying oven, with control via a Nextion screen, was based on a meticulous approach related to automation. Initially, the project began with an analysis of technical requirements, ...
Optimización y repotenciación del sistema hidráulico para el Cosquíllate para el camión Hino modelo XZU413LHKMQD3 de la Empresa Pública Transporte de Pasajeros Quito, en el contexto de mejora continua y eficiencia educativa.

Caceres Velasquez, Hugo Xavier; Quiguango Cortez, Manuel Mesias (2024-01)

This research addresses the correction of the efficiency of the turbocharged engine used by the company EPTPQ. This study is framed to improve the operational efficiency, seeking to maximize the performance and reliability ...
Plan de negocios para la implementación de un centro de acopio de reciclaje ferroso y no ferroso, en el sector El Condado-Quito.

Bautista Perez, Tatiana Jacqueline; Pozo Chugchilan, Ricardo David (2024-03)

Due to all the factors that influence market changes, entrepreneurs or businessmen who want to invest in the implementation of a business must first analyze several factors, such as the technical and financial factors that ...
Automatización de un sistema de bombeo de agua mediante un PLC Logo V8 para el tratamiento de ósmosis inversa en la Clínica.

Bargas Cadena, Jaime David; Diaz Cruz, Luis Ivan (2024-03)

Purified water is an important liquid for people suffering from kidney diseases because their kidneys are not able to tolerate the intake of water that is not purified, in the company Menydial. This situation is solved ...

Mostrando ítems 1-20 de 334

Página siguiente

Buscar en DSpace

Listar

Todo DSpace

Envíos recientes

Repositorio Digital Tecnológico Universitario Vida Nueva: Envíos recientes

Buscar en DSpace

Listar

Todo DSpace

Mi cuenta