• Diseño y construcción de un módulo didáctico para el funcionamiento de un motor de un vehículo eléctrico con panel. 

  Vilatuña Taco, Bryan Dario (2024-01)

  The research topic involves the design and construction of a didactic module for the operation of an electric vehicle s motor with a solar panel. The technological proposal includes systems available on the national and ...
• Diseño y construcción de un banco de prueba para ejecutar procesos de verificación y diagnóstico en diferentes computadoras. 

  Mayorga Jarrin, Roberto Carlos; Simba Bravo, Edwin Efrain (2024-03)

  The present work deals with the construction of equipment for banking ECUs of different automotive computers, With the advance of technology in the automotive sector, The motor module has acquired a fundamental role for ...
• Diseño e implementación de un módulo de entrenamiento del sistema de alimentación de combustible en un sistema de inyección a gasolina del vehículo Chevrolet Aveo 1.5. 

  Guadalupe Agualsaca, Byron Lenin; Lopez Tapia, Jose Fernando (2024-08)

  This research focuses on the design and implementation of a training module for the fuel supply system in a gasoline injection system of the Chevrolet Aveo 1.5 vehicle. eThe main focus of this research was the development ...
• Optimización y repotenciación del sistema hidráulico para el Cosquíllate para el camión Hino modelo XZU413LHKMQD3 de la Empresa Pública Transporte de Pasajeros Quito, en el contexto de mejora continua y eficiencia educativa. 

  Caceres Velasquez, Hugo Xavier; Quiguango Cortez, Manuel Mesias (2024-01)

  This research addresses the correction of the efficiency of the turbocharged engine used by the company EPTPQ. This study is framed to improve the operational efficiency, seeking to maximize the performance and reliability ...
• Investigar el comportamiento de los gases contaminantes al implementar inyección de hidrógeno en un motor a gasolina para optimizar el proceso de combustión. 

  Morquecho Morquecho, Ivan Mauricio (2022-01)

  In this research work, the behavior of pollutant gasses was analyzed by implementing hydrogen in the gasoline engine of the Aveo Family 1.5 car. The hydrogen generator system operates through the chemical principle of ...
• Diseño e implementación de un simulador de fallas para actuadores del sistema CRDI del vehículo Chevrolet Dmax del año 2019 inyección diésel. 

  Guillen Yuqui, Frank Enrique; Peñafiel Patiño, Victor Santiago (2024-02)

  In response to the growing importance of optimizing and ensuring the reliability of diesel injection systems in vehicles, this practical application project focuses on developing a failure simulator for Common Rail Direct ...
• Implementación del simulador de fallas del sistema CRDI para el análisis de los sensores del vehículo Chevrolet Dmax 2019. 

  Paguay Ruiz, Bayron Remigio; Manobanda Achachi, Christian Fernando (2024-01)

  The research project focuses on developing and implementing a failure simulator for the Common Rail Direct Injection CRDI system for the 2019 Chevrolet DMAX vehicle. The main objective is to analyze and improve the diagnosis ...
• Diseño e implementación de un sistema automático de cambio de luces principales. 

  Bombon Tipanguano, Adrian Rolando (2024-01)

  The main objective of this research work was to design and implement an automatic system for changing the main lights of a vehicle with the use of the ATMega 328P microcontroller to achieve precise and efficient control ...
• Modificación del performance en el motor de corsa evolution 1.8 CC a través de la reprogramación de cartografías de inyección. 

  Chaglla Hoyos, Kevin Steven (2023-06)

  The present research project focused on the analysis and development of a reprogrammable control unit implementation in a Chevrolet Corsa 1.8 cc vehicle. The project followed systematic patterns to achieve its objectives ...
• Diseño y construcción de un módulo del sistema electrónico de encendido óptico para la simulación de funcionamiento, fallas y diagnóstico. 

  Guanulema Cabezas, Marco Andres (2023-08)

  The electronic system of optical ignition is complemented by a signal generator, an optical sensor also uses a system with a distributor which is equipped with a light emitting diode and a light detector diode, the last ...
• Diseño y construcción de un módulo programable en ciclos para descarga y carga automáticas para baterías híbridas de Níquel metal. 

  Pilapanta Chagmana, Christian Gabriel (2023-06)

  This project was carried out through the design of a discharge and charge module for the respective nickel metal hybrid batteries of Instituto Universitario Vida Nueva. With the purpose of verifying the electrical behavior ...
• Análisis comparativo de los valores y oscilogramas de funcionamiento de sensores originales ante alternos de un Toyota Fortuner utilizando equipos de diagnóstico. 

  Encarnacion Cabrera, Oswaldo Alexander; Ortega Oquendo, Byron David (2023-07)

  The main objective of the project is to analyze the operation of the sensors with the help of the oscilloscope at different working ranges, without the need for the vehicle to be in motion, a study of the electronic ...
• Diseño y construcción de un vehiculo tipo GO – KART con estructura tubular. 

  Gonza Valle, Rovinson Efren (2023-07)

  This project was carried out under the regulations of the (CIK/FIA) international automobile federation for the construction of Go Karts, which tells us that a Go kart is a tubular one-man vehicle that must be driven by ...
• Diseño y construcción de un módulo generador de fallas para motores a gasolina. 

  Llamba Chicaiza, Marco Alfonso (2023-07)

  The problematic situation that is addressed in the degree project is the design and construction of a fault generator module for gasoline engines, due to the need of having an efficient and low cost tool to perform fault ...
• Diseño y construcción de un módulo didáctico del sistema de frenos hidráulico como recurso de aprendizaje para los estudiantes de mecánica automotriz. 

  Toalombo Gualoto, Edison Marcelo (2023-03)

  The didactic module of hydraulic brakes was developed in Automotive Mechanics major at Instituto Superior Tecnológico Vida Nueva. For this project, many main parts from the brake system of the car were used. A metallic ...
• Repotenciación del sistema de frenos en el vehículo Datsun 1500 al sustituir los tambores delanteros por discos. 

  Tipan Quiroz, Kevin Xavier (2022-12)

  The main objective of this work is the repowering of the brake system, replacing front drums with discs, in the Datsun 1500 vehicle for the Automotive Mechanics course at the Instituto Superior Tecnológico Vida Nueva, it ...
• Banco de comprobación de la ECM KEFICO M.7.9.8 como recurso de aprendizaje para los estudiantes de la carrera de Mecánica Automotriz. 

  Salcedo Chicaiza, Danny Guillermo (2022-08)

  The purpose of this research work is to design a didactic module for automotive computers, based on the observation of the operation of a similar prototype, which is useful for the collection of information. The purpose ...
• Construcción e implementación de un módulo didáctico del sistema de encendido sin distribuidor tipo DIS como recurso de aprendizaje para el Instituto Superior Tecnológico Vida Nueva. 

  Perez Molina, Jaime Roberto (2022-07)

  The purpose of this Practical Application Project is to build and implement a didactic module of the DIS type distributorless ignition system as a learning resource for the Instituto Superior Tecnológico Vida Nueva. The ...
• Construcción e implementación de un módulo didáctico del sistema de encendido sin distribuidor tipo COP como recurso de aprendizaje para el Instituto Superior Tecnológico Vida Nueva. 

  Perez Campos, Josselyn Alejandra (2022-08)

  Direct fuel injection systems, as well as newly developed engines, are incorporating specially designed coils to increase spark energy and extend spark life. This project shows the design of the construction of a didactic ...
• Diseño y construcción de un módulo didáctico del sistema de aire acondicionado como recurso de aprendizaje para los estudiantes de Mecánica Automotriz. 

  Leiton Yar, Jefferson Alexander (2022-08)

  This practical project was carried out with the aim of implementing a didactic module of the automotive air conditioning system as a learning resource for students of the Instituto Superior Tecnológico Vida Nueva, the ...

View more